AEM 50 PSIa - 3.5 bar Stainless Air Pressure Sensor
- SKU:
- 30-2130-50
- Weight:
- 4.00 LBS
- Shipping:
- Calculated at Checkout
Related Products
Bosch 3 Bar TMAP Sensor
This sensor is the holy grail of speed density engine mapping and is used in most all of our engine management packages. Measure temperature and pressure in the same location for the most accurate...
Emtron 4.0 Bar MAP Sensor
Description The Emtron 4.0 Bar MAP Sensor is a state-of-the-art, high temperature,media resistant absolute pressure sensor. It is highly accurate,providing an analog output signal proportional to...
Emtron 1.0 Bar MAP Sensor
The Emtron 1.0 Bar MAP Sensor is a state-of-the-art, high temperature,media resistant absolute pressure sensor. It is highly accurate,providing an analog output signal proportional to the...
Bosch Pressure and Temperature Combination Sensor - Liquid
Bosch Fluid Pressure and Temperature Combination sensor 0-10 Bar Range (0-145 psi) M10 x 1.0 Thread Universal Motorsport application Adapter fittings for mounting this sensor are...
Bosch 5 Pin Pressure Sensor Connector Kit
5 Pin Bosch Connector kit for Bosch sensors
ACE Performance Fuel Pressure Sensor 150PSI
Motorsport grade 150 PSI Fluid Pressure Sensor - ideal for Fuel/Oil
Customers Also Viewed
AEM PSIg Sensors - Fuel Pressure
30-2130-150 - 150 PSIg Stainless Sensor Kit Accuracy: +/- 0.5% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity Operating Temp: -40C to 105C / -40F to 221F Burst...
AEM Boost Control Solenoid
The go to solution for aftermarket boost control. Included: Boost Control Solenoid 2 X 1/8" NPT to 3/16" Barb Adapter Muffler Details: 12VDC Operating Frequency: 31hz Duty Range: 10 to...
12 Position Potentiometer
Universal 12 Position Trim Pot can be used for virtually any Engine Management System. Used for adjusting ECU setting such as traction control, boost levels, map switching, and more. Included: 12...
AEM 75 PSIa - 5 bar Stainless Air Pressure Sensor
AEM 75 PSIa or 5 Bar Stainless Air Pressure Sensor Kit Accuracy: +/- 0.5% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity Operating Temp: -40C to 105C / -40F to...
AEM X-Series Inline Wideband UEGO AFR Sensor Controller
X-SERIES WIDEBAND UEGO CONTROLLER FEATURES: X-Series Inline Wideband UEGO AFR Controller were fastest responding wideband air/fuel ratio controllers in an independent test vs. 17 competitor...
Bosch Pressure and Temperature Combination Sensor - Liquid
Bosch Fluid Pressure and Temperature Combination sensor 0-10 Bar Range (0-145 psi) M10 x 1.0 Thread Universal Motorsport application Adapter fittings for mounting this sensor are...
Flex Fuel Sensor Connector kit
Connector kit for GM style Continental flex fuel sensor
AN10 Male to Male flare with M10x1.0 Port for Bosch Pressure and Temperature sensor
AN10 Male to Male Flare With Metric M10 x 1.0 Port 12mm depth cut featuring flared seat for use with the Bosch pressure and temperature M10 sensors These fittings make it easy to...
AN6 Male to Male flare with M10x1.0 Port for Bosch Pressure and Temperature sensor
AN10 Male to Male Flare With Metric M10 x 1.0 Port 12mm depth cut featuring flared seat for use with the Bosch pressure and temperature M10 sensors These fittings make it easy to...
Bosch 5 Pin Pressure Sensor Connector Kit
5 Pin Bosch Connector kit for Bosch sensors
Emtron 10 Position Rotary Switch – Large Knob
Emtron 10 Position Rotary Switch is desinged to integrate with any Emtron ECU with minimal setup time. The calibration for this switch is already supplied with the Emtune software and can be used to...
Emtron KV8
Emtron’s KV8 is a wire-in ECU with extreme flexibility. Industry leading I/O count will ensure you do not have to make any sacrifices when configuring your engine and vehicle. This...
Description
AEM Air Pressure Sensor - 50 PSIa or 3.5 Bar Stainless Sensor Kit
30-2130-50
- Accuracy: +/- 1% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity
- Operating Temp: -40C to 105C / -40F to 221F
- Burst Pressure: 500PSI
- Response Time: < 1ms
- Vibration:100 to 2000Hz, 20g Sinusoidal, 3 Axes
- Sensor Body: Stainless Steel
- Wetted Materials: 304L & 316L Stainless Steel
- Thread: 1/8" NPT Male Thread
- Weight: < 85 Grams
- Supply Current:
- Output: .5 to 4.5Vdc Linear
- Elec. Termination: Integral weatherproof connector, includes mating connector, pins & pin lock
- Includes: 50 PSIa or 3.5 Bar Stainless Sensor, Connector, Pins, Pin Lock, 1/8" NPT to -4 Adapter & 1/8" NPT to 3/16" Barb Adapter
Used as a coolant pressure sensor with ACE / Emtron packages
Absolute (PSIa) Pressure Sensors
AEM offers high quality stainless steel PSIa sensors in 15 (1BAR), 30 (2BAR), 50 (3.5BAR), 75 (5BAR) and 100 (7BAR). PSIa is referenced to absolute zero. Absolute zero is the pressure measurement when all the pressure exerted by the atmosphere has been removed. The most common use for absolute pressure sensors is reading manifold pressure. PSIa sensors are required if you wish to measure vacuum. A PSIa sensor will read about 14.7 PSI when the sensing element is exposed to atmospheric pressure at sea level however they can be recalibrated to read zero at atmospheric and a negative number at values less than atmospheric pressure.
0 Reviews
Shipping & Returns
Returns Policy
If you are not satisfied with any purchase made with Ace Performance, notify us within thirty-six (36) hours of receiving the package. Items may only be returned if they differ from what you ordered (ie. we shipped the wrong part to you) or you suspect there may be a defect with an item. Fitment issues (ie. you ordered the wrong part) are not a valid reason to return an item, and no refund requests due to fitment issues will be honored. To return an item incorrectly shipped to you, or that you believe to be defective, you must obtain a Return Merchandise Authorization Number (RMA #). The goods must be returned within ten (10) days in the same condition and in the original packaging. If the merchandise is damaged, or not in the original packaging, or no valid RMA # appears on the outside packaging, no refund will be forthcoming and you own the original purchase. The customer will be responsible for all shipping charges.
Electronic items are subject to engineering inspection prior to a refund being issued. All electronic items are carefully tested and inspected prior to sale. All items sold by Ace Performance are new unless otherwise specified.
If you believe a product you receive from Ace Performance has any defect, please contact us immediately. In the unlikely event that any issue should arise with your purchase, we are very motivated to locate and resolve the cause of the problem. If a manufacturing problem has occurred, we will investigate the part once it is returned to us, and then check with the manufacturer. If a defect is determined, the defective part will be replaced at no additional cost to you, or if you prefer, we will provide a full refund.
Shipping
We ship throughout the US. Note that there are restrictions on some products, and some products cannot be shipped.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
