null
BMW E36 Link G4X PNP - Ace Performance Calibration File
Zoom the image with the mouse

BMW E36 Link G4X PNP - Ace Performance Calibration File

(No reviews yet) Write a Review

$600.00
Brand
Weight:
1.00 LBS
Shipping:
Calculated at Checkout

Related Products

Description

ACE Performance base calibration is designed for use with the Link G4+ BMW e36 S50/M50 Plug in ECU

The ACE Calibration file is developed to maximize the efficiency and runability of your Link G4X E36 standalone enginemanagement system.  With this calibration file you will be able to install the ECU, drive to the dyno and with a short dyno tuning session at your local dyno you will be dialed in!  ACE will support the dyno tuner as well as all initial calibration questions.  Additional specialty and advanced calibration or diagnostic will be billed at hour hourly tuning rate of $135 per hour.
 
A description of what is included with this calibration file is below.
 

* = New

All look up tables expanded for greater resolution

Fueling :

* Fuel Modeling fully configured and functional

* Fuel and Ignition table blending via VANOS position (recommended)

24 ­ 32 pound fuel injector maps

MAP OR TP based fueling

4D fueling compensation (opposite of main fuel table)

5D BAP correction (Load as TPS)

Charge temp compensation

Cold start adjusted

Cold enrichment adjusted

Accel enrichment adjusted

Closed loop fully re­configured (including wideband AV input ­ advanced mode)

Injector timing adjusted

Ignition :

Dwell time adjusted

Idle ignition control enabled and fully configured

Transient ignition control enabled and fully configured

Engine temperature compensation

Inlet air temperature compensation adjusted

4D TP compensation enabled

5D BAP compensation enabled (Load as TPS)

Knock:

Frequency, windowing, retard/advance rate, and lockouts fully configured

Configured for individual cylinder detection

Gain per cylinder adjusted

Knock target table estimate

Bank 1 and 2 knock trim table configured

Aux outputs :

VANOS conditions include throttle position condition

Idle speed control fully re­configured for closed loop, including PID adjustments, anti­stall, and

more.

ECU logging :

Fully pre­configured and enabled

CAN output :

Customized logging sets available that enable additional important runtimes. Compatible with

AIM pre­configurations and more.

*DYNO GRAPH is an ACE calibration on a 95 M3 with a 3.2L bottom end and stock cams and stock manifolds.  This car had an Active Autowerk Track pipe and free flow exhaust.*

0 Reviews

This product hasn't received any reviews yet. Be the first to review this product!
Write a Review

Shipping & Returns

Returns Policy
If you are not satisfied with any purchase made with Ace Performance, notify us within thirty-six (36) hours of receiving the package. Items may only be returned if they differ from what you ordered (ie. we shipped the wrong part to you) or you suspect there may be a defect with an item. Fitment issues (ie. you ordered the wrong part) are not a valid reason to return an item, and no refund requests due to fitment issues will be honored. To return an item incorrectly shipped to you, or that you believe to be defective, you must obtain a Return Merchandise Authorization Number (RMA #). The goods must be returned within ten (10) days in the same condition and in the original packaging. If the merchandise is damaged, or not in the original packaging, or no valid RMA # appears on the outside packaging, no refund will be forthcoming and you own the original purchase. The customer will be responsible for all shipping charges.

Electronic items are subject to engineering inspection prior to a refund being issued. All electronic items are carefully tested and inspected prior to sale. All items sold by Ace Performance are new unless otherwise specified.

If you believe a product you receive from Ace Performance has any defect, please contact us immediately. In the unlikely event that any issue should arise with your purchase, we are very motivated to locate and resolve the cause of the problem. If a manufacturing problem has occurred, we will investigate the part once it is returned to us, and then check with the manufacturer. If a defect is determined, the defective part will be replaced at no additional cost to you, or if you prefer, we will provide a full refund.

Shipping
We ship throughout the US. Note that there are restrictions on some products, and some products cannot be shipped.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.